NTCA Regional Training

National Tile Contractors Association Regional Training and Workshops at Floor & Decor

Classes

Floor & Decor has partnered with the NTCA to provide Regional Training Classes and Workshops for tile installation professionals at Floor & Decor locations across the United States.

Floor & Decor has partnered with the NTCA to provide Regional Training Classes and Workshops for tile installation professionals at Floor & Decor locations across the United States.

17 February

Regional Training | Registration Required

Draper, UT - Substrate Prep for Large Format Tiles

Attendees will learn how to use the ANSI A108 standards and TCNA Handbook to address real world challenges in hands on installations focusing on substrate examination and preparation for setting large format tile.

February 17, 7:30am at Draper

12101 S. State Street, Draper, UT, 84020

Register Now
21 February

Workshop | Walk-Ins Welcome

Pleasant Hill, CA - Tile Matters: Best Practices for Pros

This workshop introduces and reinforces critical installation methods, standards and best practices. Learn Tile Industry Standards, who publishes them, why they are important to own, understand and use to produce successful tile installations. NTCA instructors will conduct hands-on demonstrations of critical installation methods.

February 21, 5:00pm at Pleasant Hill

200 Golf Club Rd, Pleasant Hill, CA, 94523

Register Now
22 February

Workshop | Walk-Ins Welcome

Bakersfield, CA - Tile Technology: Adhesives

This free to attend workshop is a professional development training opportunity open to all tile industry professionals. Attendees will be exposed to basic, intermediate, and advanced skills and information provided by knowledgeable, experienced NTCA staff trainers. All content is based on recognized tile industry standards, methods, best practices, and manufacturer instructions designed to achieve beautiful tile installations that will stand the test of time and intended use.

February 22, 5:00pm at Bakersfield

6915 Colony Street, Bakersfield, CA, 93307

Register Now
28 February

Workshop | Walk-Ins Welcome

Houston, TX - Failures: Could It Be Me?

Get an introduction to a variety of failures commonly seen in tile installations. Types of failures identified include: improper or incomplete surface preparation, improper troweling techniques, improper bond coat coverage and thickness, improper use and preparation of setting materials, lack of expansion or movement joints, improper shower or wet area construction among others.

February 28, 5:00pm at Cypress

20502 Hempstead Rd, Houston, TX, 77065

Register Now
1 March

Workshop | Walk-Ins Welcome

Spring, TX - The Ins and Outs of Layout

A layout can make or break the finished appearance of a tile installation. This workshop reviews the basics of layout including the usefulness of grid patterns, squaring a room and how to determine a room’s focal point to properly center and balance the tile installation.

March 1, 4:30pm at Oak Ridge North

26906 Interstate 45 N, Spring, TX, 77386

Register Now
2 March

Workshop | Walk-Ins Welcome

Tomball, TX - Tile Matters - Best Practices for Pros

This workshop introduces and reinforces critical installation methods, standards and best practices. Learn Tile Industry Standards: who publishes them, why they are important to own, understand and use to produce successful tile installations. NTCA instructors will conduct hands-on demonstrations of critical installation methods.

March 2, 4:30pm at Tomball

25510 SH 249, Tomball, TX, 77375

Register Now
3 March

Regional Training | Registration Required

San Leandro, CA - GPTP Installation (XL Slabs)

Attendees will learn the tile industry standards with a focus on the new standards and methods for installing Gauged Porcelain Tile and Panels (GPTP). Learn how it is made, where it can be used for and the special tools, setting materials and techniques required to install it. This will teach you Use of ANSI A108.19 to install Gauged Porcelain Tile and Panels. Proper Use of specialty tools and setting materials to install GPTP and Working with a team to install GPTP.

March 3, 7:30AM at San Leandro

1700 Fairway Drive, San Leandro, CA, 94578

Register Now
7 March

Workshop | Walk-Ins Welcome

Cedar Park, TX - Tile Technology - Adhesives

This free to attend workshop is a professional development training opportunity open to all tile industry professionals. Attendees will be exposed to basic, intermediate, and advanced skills and information provided by knowledgeable, experienced NTCA staff trainers. All content is based on recognized tile industry standards, methods, best practices, and manufacturer instructions designed to achieve beautiful tile installations that will stand the test of time and intended use.

March 7, 4:30p at Cedar Park

1200 Arrowpoint Dr, Cedar Park, TX, 78613

Register Now
8 March

Regional Training | Registration Required

Santa Ana, CA - GPTP Installation (XL Slabs)

Attendees will learn the tile industry standards with a focus on the new standards and methods for installing Gauged Porcelain Tile and Panels (GPTP). Learn how it is made, where it can be used for and the special tools, setting materials and techniques required to install it. This will teach you Use of ANSI A108.19 to install Gauged Porcelain Tile and Panels. Proper Use of specialty tools and setting materials to install GPTP and Working with a team to install GPTP.

March 8, 7:30AM at Santa Ana

1801 East Dyer Road, Santa Ana, CA, 92705

Register Now
8 March

Workshop | Walk-Ins Welcome

Live Oak, TX - Tile Matters - Best Practices for Pros

This workshop introduces and reinforces critical installation methods, standards and best practices. Learn Tile Industry Standards: who publishes them, why they are important to own, understand and use to produce successful tile installations. NTCA instructors will conduct hands-on demonstrations of critical installation methods.

March 8, 4:30pm at Live Oak

4200 Ikea RBFCU Parkway, Live Oak, TX, 78233

Register Now
9 March

Workshop | Walk-Ins Welcome

McAllen, TX - Failures - Could it be Me?

Get an introduction to a variety of failures commonly seen in tile installations. Types of failures identified include: improper or incomplete surface preparation, improper troweling techniques, improper bond coat coverage and thickness, improper use and preparation of setting materials, lack of expansion or movement joints, improper shower or wet area construction among others.

March 9, 4:30p at McAllen

1101 W Expressway 83, McAllen, TX, 78503

Register Now
9 March

Workshop | Walk-Ins Welcome

McKinney, TX - The Ins and Outs of Layout

A layout can make or break the finished appearance of a tile installation. This workshop reviews the basics of layout including the usefulness of grid patterns, squaring a room and how to determine a room’s focal point to properly center and balance the tile installation.

March 9, 4:30p at McKinney

2800 W. University, McKinney, TX, 75071

Register Now
13 March

Regional Training | Registration Required

West Covina, CA - GPTP Installation (XL Slab)

Attendees will learn the tile industry standards with a focus on the new standards and methods for installing Gauged Porcelain Tile and Panels (GPTP). Learn how it is made, where it can be used for and the special tools, setting materials and techniques required to install it. This will teach you Use of ANSI A108.19 to install Gauged Porcelain Tile and Panels. Proper Use of specialty tools and setting materials to install GPTP and Working with a team to install GPTP.

March 13, 7:30AM at West Covina

730 S Orange Ave West, West Covina, CA, 91790

Register Now
14 March

Workshop | Walk-Ins Welcome

Miami, FL - Tile Matters - Best Practices for Pros

This workshop introduces and reinforces critical installation methods, standards and best practices. Learn Tile Industry Standards: who publishes them, why they are important to own, understand and use to produce successful tile installations. NTCA instructors will conduct hands-on demonstrations of critical installation methods.

March 14, 4:30p at Kendall (Miami)

8295 SW 124th Ave, Miami, FL, 33183

Register Now
15 March

Workshop | Walk-Ins Welcome

Coral Springs, FL - The Ins and Outs of Layout

A layout can make or break the finished appearance of a tile installation. This workshop reviews the basics of layout including the usefulness of grid patterns, squaring a room and how to determine a room’s focal point to properly center and balance the tile installation.

March 15, 5:00PM at Coral Springs

11711 West Sample Road, Coral Springs, FL, 33065

Register Now
16 March

Workshop | Walk-Ins Welcome

Riviera Beach, FL - Tile Matters - Best Practices for Pros

This workshop introduces and reinforces critical installation methods, standards and best practices. Learn Tile Industry Standards: who publishes them, why they are important to own, understand and use to produce successful tile installations. NTCA instructors will conduct hands-on demonstrations of critical installation methods.

March 16, 5:00PM at Riviera Beach

7540 Byron Drive, Riviera Beach, FL, 33404

Register Now
17 March

Regional Training | Registration Required

Downey, CA - GPTP Installation (XL Slab)

Attendees will learn the tile industry standards with a focus on the new standards and methods for installing Gauged Porcelain Tile and Panels (GPTP). Learn how it is made, where it can be used for and the special tools, setting materials and techniques required to install it. This will teach you Use of ANSI A108.19 to install Gauged Porcelain Tile and Panels. Proper Use of specialty tools and setting materials to install GPTP and Working with a team to install GPTP.

March 17, 7:30AM at Downey

8925 Apollo Way, Downey, CA, 90242

Register Now
21 March

Workshop | Walk-Ins Welcome

Hampton, VA - Failures - Could it be Me?

Get an introduction to a variety of failures commonly seen in tile installations. Types of failures identifi ed include: improper or incomplete surface preparation, improper troweling techniques, improper bond coat coverage and thickness, improper use and preparation of setting materials, lack of expansion or movement joints, improper shower or wet area construction among others.

March 21, 5:00PM at Hampton

2053 Executive Drive, Hampton, VA, 23666

Register Now
23 March

Regional Training | Registration Required

San Diego, CA - GPTP Installation (XL Slab)

Attendees will learn the tile industry standards with a focus on the new standards and methods for installing Gauged Porcelain Tile and Panels (GPTP). Learn how it is made, where it can be used for and the special tools, setting materials and techniques required to install it. This will teach you Use of ANSI A108.19 to install Gauged Porcelain Tile and Panels. Proper Use of specialty tools and setting materials to install GPTP and Working with a team to install GPTP.

March 23, 7:30AM at San Diego

960 Sherman Street, San Diego, CA, 92110

Register Now
29 March

Workshop | Walk-Ins Welcome

Greenville, SC - Tile Matters - Best Practices for Pros

This workshop introduces and reinforces critical installation methods, standards and best practices. Learn Tile Industry Standards: who publishes them, why they are important to own, understand and use to produce successful tile installations. NTCA instructors will conduct hands-on demonstrations of critical installation methods.

March 29, 5:00PM at Greenville

401 Roper Mountain Rd, Greenville, SC, 29615

Register Now
30 March

Regional Training | Registration Required

South Summerlin, NV - GPTP Installation (XL Slabs)

Attendees will learn the tile industry standards with a focus on the new standards and methods for installing Gauged Porcelain Tile and Panels (GPTP). Learn how it is made, where it can be used for and the special tools, setting materials and techniques required to install it. This will teach you Use of ANSI A108.19 to install Gauged Porcelain Tile and Panels. Proper Use of specialty tools and setting materials to install GPTP and Working with a team to install GPTP.

March 30, 7:30AM at South Summerlin

4355 S. Grand Canyon Drive, South Summerlin, NV, 89147

Register Now
6 April

Regional Training | Registration Required

West San Antonio, TX - GPTP Installation (XL Slabs)

Attendees will learn the tile industry standards with a focus on the new standards and methods for installing Gauged Porcelain Tile and Panels (GPTP). Learn how it is made, where it can be used for and the special tools, setting materials and techniques required to install it. This will teach you Use of ANSI A108.19 to install Gauged Porcelain Tile and Panels. Proper Use of specialty tools and setting materials to install GPTP and Working with a team to install GPTP.

April 6, 7:30AM at West San Antonio

7126 W 1604 N San Antonio, West San Antonio, TX, 78254

Register Now
12 April

Regional Training | Registration Required

Lutz, FL - GPTP Installation (XL Slabs)

Attendees will learn the tile industry standards with a focus on the new standards and methods for installing Gauged Porcelain Tile and Panels (GPTP). Learn how it is made, where it can be used for and the special tools, setting materials and techniques required to install it. This will teach you Use of ANSI A108.19 to install Gauged Porcelain Tile and Panels. Proper Use of specialty tools and setting materials to install GPTP and Working with a team to install GPTP.

April 12, 7:30AM at Lutz (Wesley Chapel)

25737 Sierra Center Blvd, Lutz, FL, 33559

Register Now
20 April

Regional Training | Registration Required

Houston, TX - GPTP Installation (XL Slabs)

Attendees will learn the tile industry standards with a focus on the new standards and methods for installing Gauged Porcelain Tile and Panels (GPTP). Learn how it is made, where it can be used for and the special tools, setting materials and techniques required to install it. This will teach you Use of ANSI A108.19 to install Gauged Porcelain Tile and Panels. Proper Use of specialty tools and setting materials to install GPTP and Working with a team to install GPTP.

April 20, 7:30AM at Houston

4330 Dacoma St, Houston, TX, 77092

Register Now
27 April

Regional Training | Registration Required

Austin, TX - GPTP Installation (XL Slabs)

Attendees will learn the tile industry standards with a focus on the new standards and methods for installing Gauged Porcelain Tile and Panels (GPTP). Learn how it is made, where it can be used for and the special tools, setting materials and techniques required to install it. This will teach you Use of ANSI A108.19 to install Gauged Porcelain Tile and Panels. Proper Use of specialty tools and setting materials to install GPTP and Working with a team to install GPTP.

April 27, 7:30AM at Austin (Parmer)

12901 N Interstate Hwy 35, Austin, TX, 78753

Register Now
27 April

Workshop | Walk-Ins Welcome

Milpitas, CA - Failures - Could it be Me?

Get an introduction to a variety of failures commonly seen in tile installations. Types of failures identified include improper or incomplete surface preparation, improper troweling techniques, improper bond coat coverage and thickness, improper use and preparation of setting materials, lack of expansion or movement joints, improper shower or wet area construction among others.

April 27, 5:00PM at Milpitas

1665 North McCarthy Blvd, Milpitas, CA, 95035

Register Now
2 May

Workshop | Walk-Ins Welcome

Farmingdale, NY - Tile Matters - Best Practices for Pros

This workshop introduces and reinforces critical installation methods, standards and best practices. Learn Tile Industry Standards: who publishes them, why they are important to own, understand and use to produce successful tile installations. NTCA instructors will conduct hands-on demonstrations of critical installation methods.

May 2, 5:00PM at Farmingdale

1002 Broad Hollow Rd, Farmingdale, NY, 11735

Register Now
4 May

Regional Training | Registration Required

Savannah, GA - Substrate Prep and Large Format Tile

Attendees will learn how to use the ANSI A108 standards and TCNA Handbook to address real world challenges in hands-on installations focusing on substrate examination and preparation for setting large format tile.

May 4, 7:30AM at Savannah

1800 E. Victory Drive, Savannah, GA, 31404

Register Now
9 May

Workshop | Walk-Ins Welcome

West Hartford, CT - Failures - Could it be Me?

Get an introduction to a variety of failures commonly seen in tile installations. Types of failures identified include improper or incomplete surface preparation, improper troweling techniques, improper bond coat coverage and thickness, improper use and preparation of setting materials, lack of expansion or movement joints, improper shower or wet area construction among others.

May 9, 5:00PM at West Hartford

46 Kane Street `, West Hartford, CT, 6119

Register Now
10 May

Workshop | Walk-Ins Welcome

Danbury, CT - The Ins and Outs of Layout

A layout can make or break the finished appearance of a tile installation. This workshop reviews the basics of layout including the usefulness of grid patterns, squaring a room and how to determine a room’s focal point to properly center and balance the tile installation.

May 10, 5:00PM at Danbury

116 Federal Rd., Danbury, CT, 6811

Register Now
16 May

Workshop | Walk-Ins Welcome

Avon, MA - Tile Matters - Best Practices for Pros

This workshop introduces and reinforces critical installation methods, standards and best practices. Learn Tile Industry Standards: who publishes them, why they are important to own, understand and use to produce successful tile installations. NTCA instructors will conduct hands-on demonstrations of critical installation methods.

May 16, 5:00PM at Avon

80 Stockwell Dr, Avon, MA, 2322

Register Now
17 May

Workshop | Walk-Ins Welcome

Bellingham, MA - Failures - Could it be Me?

Get an introduction to a variety of failures commonly seen in tile installations. Types of failures identified include improper or incomplete surface preparation, improper troweling techniques, improper bond coat coverage and thickness, improper use and preparation of setting materials, lack of expansion or movement joints, improper shower or wet area construction among others.

May 17, 5:00PM at Bellingham

217 Hartford Ave, Bellingham, MA, 2019

Register Now
17 May

Workshop | Walk-Ins Welcome

Salt Lake City, UT - Tile Matters - Best Practices for Pros

This workshop introduces and reinforces critical installation methods, standards and best practices. Learn Tile Industry Standards: who publishes them, why they are important to own, understand and use to produce successful tile installations. NTCA instructors will conduct hands-on demonstrations of critical installation methods.

May 17, 5:00PM at Salt Lake City

1580 South 500 West, Salt Lake City, UT, 84115

Register Now
17 May

Workshop | Walk-Ins Welcome

Lafayette, LA - The Ins and Outs of Layout

A layout can make or break the finished appearance of a tile installation. This workshop reviews the basics of layout including the usefulness of grid patterns, squaring a room and how to determine a room’s focal point to properly center and balance the tile installation.

May 17, 5:00PM at Lafayette

3300 Ambassador Caffery Pkwy, Lafayette, LA, 70506

Register Now
18 May

Workshop | Walk-Ins Welcome

Dorchester, MA - The Ins and Outs of Layout

A layout can make or break the finished appearance of a tile installation. This workshop reviews the basics of layout including the usefulness of grid patterns, squaring a room and how to determine a room’s focal point to properly center and balance the tile installation.

May 18, 5:00PM at Dorchester

725 Morrissey Blvd, Dorchester, MA, 2122

Register Now
18 May

Workshop | Walk-Ins Welcome

Humble, TX - Failures - Could it be Me?

Get an introduction to a variety of failures commonly seen in tile installations. Types of failures identified include improper or incomplete surface preparation, improper troweling techniques, improper bond coat coverage and thickness, improper use and preparation of setting materials, lack of expansion or movement joints, improper shower or wet area construction among others.

May 18, 5:00PM at Humble

18840 Hwy 59, Humble, TX, 77338

Register Now
23 May

Workshop | Walk-Ins Welcome

Wilmington, NC - Tile Matters - Best Practices for Pros

This workshop introduces and reinforces critical installation methods, standards and best practices. Learn Tile Industry Standards: who publishes them, why they are important to own, understand and use to produce successful tile installations. NTCA instructors will conduct hands-on demonstrations of critical installation methods.

May 23, 5:00PM at Wilmington

816 South College Road, Wilmington, NC, 28403

Register Now
25 May

Workshop | Walk-Ins Welcome

Mooresville, NC - The Ins and Outs of Layout

A layout can make or break the finished appearance of a tile installation. This workshop reviews the basics of layout including the usefulness of grid patterns, squaring a room and how to determine a room’s focal point to properly center and balance the tile installation.

May 25, 5:00PM at Mooresville

236 Norman Station Blvd, Mooresville, NC,

Register Now
8 June

Regional Training | Registration Required

Orlando, FL - GPTP Installation (XL Slabs)

Attendees will learn the tile industry standards with a focus on the new standards and methods for installing Gauged Porcelain Tile and Panels (GPTP). Learn how it is made, where it can be used for and the special tools, setting materials and techniques required to install it. This will teach you Use of ANSI A108.19 to install Gauged Porcelain Tile and Panels. Proper Use of specialty tools and setting materials to install GPTP and Working with a team to install GPTP.

June 8, 7:30AM at Orlando

3113 East Colonial Drive, Orlando, FL, 32803

Register Now
13 June

Workshop | Walk-Ins Welcome

Hulen, TX - Failures - Could it be Me?

Get an introduction to a variety of failures commonly seen in tile installations. Types of failures identified include: improper or incomplete surface preparation, improper troweling techniques, improper bond coat coverage and thickness, improper use and preparation of setting materials, lack of expansion or movement joints, improper shower or wet area construction among others.

June 13, 5:00PM at Hulen

5201 S. Hulen St., Hulen, TX, 76132

Register Now
13 June

Workshop | Walk-Ins Welcome

Tampa, FL - Tile Matters - Best Practices for Pros

This workshop introduces and reinforces critical installation methods, standards and best practices. Learn Tile Industry Standards: who publishes them, why they are important to own, understand and use to produce successful tile installations. NTCA instructors will conduct hands-on demonstrations of critical installation methods.

June 13, 5:00PM at North Dale Mabry

2913 North Dale Mabry Hwy, Tampa, FL, 92129

Register Now
13 June

Workshop | Walk-Ins Welcome

San Diego, CA - The Ins and Outs of Layout

A layout can make or break the finished appearance of a tile installation. This workshop reviews the basics of layout including the usefulness of grid patterns, squaring a room and how to determine a room’s focal point to properly center and balance the tile installation.

June 13, 5:00PM at San Deigo

14340 Penasquitos Drive, San Diego, CA, 92129

Register Now
14 June

Workshop | Walk-Ins Welcome

Plano, TX - Tile Matters - Best Practices for Pros

This workshop introduces and reinforces critical installation methods, standards and best practices. Learn Tile Industry Standards: who publishes them, why they are important to own, understand and use to produce successful tile installations. NTCA instructors will conduct hands-on demonstrations of critical installation methods.

June 14, 5:00PM at Plano

800A West 15th Street, Plano, TX, 75075

Register Now
14 June

Workshop | Walk-Ins Welcome

San Gabriel, CA - The Ins and Outs of Layout

A layout can make or break the finished appearance of a tile installation. This workshop reviews the basics of layout including the usefulness of grid patterns, squaring a room and how to determine a room’s focal point to properly center and balance the tile installation.

June 14, 5:00 PM at San Gabriel

7279 Rosemead Blvd, San Gabriel, CA, 91775

Register Now
14 June

Workshop | Walk-Ins Welcome

Lakeland, FL - Tile Matters - Best Practices for Pros

This workshop introduces and reinforces critical installation methods, standards and best practices. Learn Tile Industry Standards: who publishes them, why they are important to own, understand and use to produce successful tile installations. NTCA instructors will conduct hands-on demonstrations of critical installation methods.

June 14, 5:00PM at Lakeland

919 Lakeland Park Center Drive, Lakeland, FL, 33809

Register Now
15 June

Workshop | Walk-Ins Welcome

The Colony, TX - Failures - Could it be Me?

Get an introduction to a variety of failures commonly seen in tile installations. Types of failures identifi ed include: improper or incomplete surface preparation, improper troweling techniques, improper bond coat coverage and thickness, improper use and preparation of setting materials, lack of expansion or movement joints, improper shower or wet area construction among others.

June 15, 5:00PM at The Colony

5651 State Hwy 121, The Colony, TX, 75056

Register Now
15 June

Workshop | Walk-Ins Welcome

Norco, CA - The Ins and Outs of Layout

A layout can make or break the finished appearance of a tile installation. This workshop reviews the basics of layout including the usefulness of grid patterns, squaring a room and how to determine a room’s focal point to properly center and balance the tile installation.

June 15, 5:00PM at Norco

200 Hidden Valley Pkwy, Norco, CA, 92860

Register Now
15 June

Workshop | Walk-Ins Welcome

Fern Park, FL - Failures - Could it be Me?

Get an introduction to a variety of failures commonly seen in tile installations. Types of failures identifi ed include: improper or incomplete surface preparation, improper troweling techniques, improper bond coat coverage and thickness, improper use and preparation of setting materials, lack of expansion or movement joints, improper shower or wet area construction among others.

June 15, 5:00PM at Fern Park

355 Semoran Blvd, Fern Park, FL, 32730

Register Now
20 June

Workshop | Walk-Ins Welcome

Murrieta, CA - Tile Matters - Best Practices for Pros

This workshop introduces and reinforces critical installation methods, standards and best practices. Learn Tile Industry Standards: who publishes them, why they are important to own, understand and use to produce successful tile installations. NTCA instructors will conduct hands-on demonstrations of critical installation methods.

June 20, 5:00PM at Murrieta

39835 Alta Murrieta Dr, Murrieta, CA, 92563

Register Now
21 June

Workshop | Walk-Ins Welcome

Rancho Cucamonga, CA - The Ins and Outs of Layout

A layout can make or break the finished appearance of a tile installation. This workshop reviews the basics of layout including the usefulness of grid patterns, squaring a room and how to determine a room’s focal point to properly center and balance the tile installation.

June 21, 5:00PM at Rancho Cucamonga

8250 Day Creek Blvd Suite 150, Rancho Cucamonga, CA, 91739

Register Now
22 June

Workshop | Walk-Ins Welcome

Oxnard, CA - Failures - Could it be Me?

Get an introduction to a variety of failures commonly seen in tile installations. Types of failures identifi ed include: improper or incomplete surface preparation, improper troweling techniques, improper bond coat coverage and thickness, improper use and preparation of setting materials, lack of expansion or movement joints, improper shower or wet area construction among others.

June 22, 5:00PM at Oxnard

1901 Ventura Blvd, Oxnard, CA, 93036

Register Now
22 June

Regional Training | Registration Required

Brookhaven, GA - GPTP Installation (XL Slab)

Attendees will learn the tile industry standards with a focus on the new standards and methods for installing Gauged Porcelain Tile and Panels (GPTP). Learn how it is made, where it can be used for and the special tools, setting materials and techniques required to install it. This will teach you Use of ANSI A108.19 to install Gauged Porcelain Tile and Panels. Proper Use of specialty tools and setting materials to install GPTP and Working with a team to install GPTP.

June 22, 7:30AM at Atlanta

1690 NE Expy NE, Brookhaven, GA, 30329

Register Now
29 June

Workshop | Walk-Ins Welcome

Lexington, KY - The Ins and Outs of Layout

A layout can make or break the finished appearance of a tile installation. This workshop reviews the basics of layout including the usefulness of grid patterns, squaring a room and how to determine a room’s focal point to properly center and balance the tile installation.

June 29, 5:00PM at Lexington

2909 Richmond Road, Lexington, KY, 40509

Register Now
11 July

Workshop | Walk-Ins Welcome

Wayne, NJ - Tile Matters - Best Practices for Pros

This workshop introduces and reinforces critical installation methods, standards and best practices. Learn Tile Industry Standards: who publishes them, why they are important to own, understand and use to produce successful tile installations. NTCA instructors will conduct hands-on demonstrations of critical installation methods.

July 11, 5:00PM at Wayne

77 Willowbrook Blvd., Wayne, NJ, 07470

Register Now
12 July

Workshop | Walk-Ins Welcome

Elizabeth, NJ - Failures - Could it be Me?

Get an introduction to a variety of failures commonly seen in tile installations. Types of failures identifi ed include: improper or incomplete surface preparation, improper troweling techniques, improper bond coat coverage and thickness, improper use and preparation of setting materials, lack of expansion or movement joints, improper shower or wet area construction among others.

July 12, 5:00PM at Elizabeth

900 Ikea Dr, Elizabeth, NJ, 07201

Register Now
18 July

Workshop | Walk-Ins Welcome

Capitol Heights, MD - Tile Matters - Best Practices for Pros

This workshop introduces and reinforces critical installation methods, standards and best practices. Learn Tile Industry Standards: who publishes them, why they are important to own, understand and use to produce successful tile installations. NTCA instructors will conduct hands-on demonstrations of critical installation methods.

July 18, 5:00PM at Capitol Heights

1853 Ritchie Station Court, Capitol Heights, MD, 20743

Register Now
19 July

Workshop | Walk-Ins Welcome

Parkville, MD - The Ins and Outs of Layout

A layout can make or break the finished appearance of a tile installation. This workshop reviews the basics of layout including the usefulness of grid patterns, squaring a room and how to determine a room’s focal point to properly center and balance the tile installation.

July 19, 5:00PM at Parkville

8980 Waltham Woods Road, Parkville, MD, 21234

Register Now
21 July

Workshop | Walk-Ins Welcome

Silver Springs, MD - The Ins and Outs of Layout

A layout can make or break the finished appearance of a tile installation. This workshop reviews the basics of layout including the usefulness of grid patterns, squaring a room and how to determine a room’s focal point to properly center and balance the tile installation.

July 21, 5:00PM at Aspen Hill

14014 Connecticut Avenue, Silver Springs, MD, 20906

Register Now
27 July

Regional Training | Registration Required

Mesa, AZ - GPTP Installation (XL Slab)

Attendees will learn the tile industry standards with a focus on the new standards and methods for installing Gauged Porcelain Tile and Panels (GPTP). Learn how it is made, where it can be used for and the special tools, setting materials and techniques required to install it. This will teach you Use of ANSI A108.19 to install Gauged Porcelain Tile and Panels. Proper Use of specialty tools and setting materials to install GPTP and Working with a team to install GPTP.

July 27, 7:30AM at Mesa

7022 East Hampton Avenue, Mesa, AZ, 85209

Register Now
1 August

Workshop | Walk-Ins Welcome

Tolleson, AZ - Failures - Could it be Me?

Get an introduction to a variety of failures commonly seen in tile installations. Types of failures identifi ed include: improper or incomplete surface preparation, improper troweling techniques, improper bond coat coverage and thickness, improper use and preparation of setting materials, lack of expansion or movement joints, improper shower or wet area construction among others.

August 1, 5:00PM at Tolleson

9261 West McDowell Rd, Tolleson, AZ, 85353

Register Now
8 August

Workshop | Walk-Ins Welcome

Sarasota, FL - Failures - Could it be Me?

Get an introduction to a variety of failures commonly seen in tile installations. Types of failures identifi ed include: improper or incomplete surface preparation, improper troweling techniques, improper bond coat coverage and thickness, improper use and preparation of setting materials, lack of expansion or movement joints, improper shower or wet area construction among others.

August 8, 5:00PM at Sarasota

8415 Lockwood Ridge Road, Sarasota, FL, 34243

Register Now
8 August

Workshop | Walk-Ins Welcome

Surprise, AZ - Tile Matters - Best Practices for Pros

This workshop introduces and reinforces critical installation methods, standards and best practices. Learn Tile Industry Standards: who publishes them, why they are important to own, understand and use to produce successful tile installations. NTCA instructors will conduct hands-on demonstrations of critical installation methods.

August 8, 5:00PM at Surprise

13230 N Prasada Pkwy, Surprise, AZ, 85388

Register Now
9 August

Workshop | Walk-Ins Welcome

Portland, OR - Tile Matters - Best Practices for Pros

This workshop introduces and reinforces critical installation methods, standards and best practices. Learn Tile Industry Standards: who publishes them, why they are important to own, understand and use to produce successful tile installations. NTCA instructors will conduct hands-on demonstrations of critical installation methods.

August 9, 5:00PM at North Portland

11919 N Jantzen Dr., Portland, OR, 97217

Register Now
9 August

Workshop | Walk-Ins Welcome

Clearwater, FL - The Ins and Outs of Layout

A layout can make or break the finished appearance of a tile installation. This workshop reviews the basics of layout including the usefulness of grid patterns, squaring a room and how to determine a room’s focal point to properly center and balance the tile installation.

August 9, 5:00PM at Clearwater

21760 US Hwy 19, Clearwater, FL, 33765

Register Now
10 August

Workshop | Walk-Ins Welcome

Fort Myers, FL - The Ins and Outs of Layout

A layout can make or break the finished appearance of a tile installation. This workshop reviews the basics of layout including the usefulness of grid patterns, squaring a room and how to determine a room’s focal point to properly center and balance the tile installation.

August 10, 5:00PM at Fort Myers

3853 Cleveland Avenue S, Fort Myers, FL, 33901

Register Now
10 August

Regional Training | Registration Required

Chicago, IL - Substrate Prep and Large Format Tile

Attendees will learn how to use the ANSI A108 standards and TCNA Handbook to address real world challenges in hands-on installations focusing on substrate examination and preparation for setting large format tile.

August 10, 7:30AM at Chicago (Addison Street)

3443 W Addison St., Chicago, IL, 60618

Register Now
11 August

Workshop | Walk-Ins Welcome

Albuquerque, NM - The Ins and Outs of Layout

A layout can make or break the finished appearance of a tile installation. This workshop reviews the basics of layout including the usefulness of grid patterns, squaring a room and how to determine a room’s focal point to properly center and balance the tile installation.

August 11, 5:00PM at Albuquerque

, Albuquerque, NM, 87109

Register Now
15 August

Workshop | Walk-Ins Welcome

Colorado Springs, CO - Failures - Could it be Me?

Get an introduction to a variety of failures commonly seen in tile installations. Types of failures identifi ed include: improper or incomplete surface preparation, improper troweling techniques, improper bond coat coverage and thickness, improper use and preparation of setting materials, lack of expansion or movement joints, improper shower or wet area construction among others.

August 15, 5:00PM at Colorado Springs

6867 Crest Hill View, Colorado Springs, CO, 80919

Register Now
15 August

Workshop | Walk-Ins Welcome

Antioch, TN - Tile Matters - Best Practices for Pros

This workshop introduces and reinforces critical installation methods, standards and best practices. Learn Tile Industry Standards: who publishes them, why they are important to own, understand and use to produce successful tile installations. NTCA instructors will conduct hands-on demonstrations of critical installation methods.

August 15, 5:00PM at Nashville

5330 Cane Ridge Road, Antioch, TN, 37013

Register Now
15 August

Workshop | Walk-Ins Welcome

Everett, WA - Tile Matters - Best Practices for Pros

This workshop introduces and reinforces critical installation methods, standards and best practices. Learn Tile Industry Standards: who publishes them, why they are important to own, understand and use to produce successful tile installations. NTCA instructors will conduct hands-on demonstrations of critical installation methods.

August 15, 5:00PM at Everett

1502 SE Everett Mall Way, Everett, WA, 98208

Register Now
16 August

Workshop | Walk-Ins Welcome

Brentwood, TN - The Ins and Outs of Layout

A layout can make or break the finished appearance of a tile installation. This workshop reviews the basics of layout including the usefulness of grid patterns, squaring a room and how to determine a room’s focal point to properly center and balance the tile installation.

August 16, 5:00PM at Brentwood

7105 Moores Lane, Brentwood, TN, 370

Register Now
13 September

Regional Training | Registration Required

Commack, NY - GPTP Installation (XL Slab)

Attendees will learn the tile industry standards with a focus on the new standards and methods for installing Gauged Porcelain Tile and Panels (GPTP). Learn how it is made, where it can be used for and the special tools, setting materials and techniques required to install it. This will teach you Use of ANSI A108.19 to install Gauged Porcelain Tile and Panels. Proper Use of specialty tools and setting materials to install GPTP and Working with a team to install GPTP.

September 13, 7:30AM at Commack

4 Henry Street, Commack, NY, 77125

Register Now
28 September

Regional Training | Registration Required

Wayne, NJ - GPTP Installation (XL Slab)

Attendees will learn the tile industry standards with a focus on the new standards and methods for installing Gauged Porcelain Tile and Panels (GPTP). Learn how it is made, where it can be used for and the special tools, setting materials and techniques required to install it. This will teach you Use of ANSI A108.19 to install Gauged Porcelain Tile and Panels. Proper Use of specialty tools and setting materials to install GPTP and Working with a team to install GPTP.

September 28, 7:30AM at Wayne

77 Willowbrook Blvd., Wayne, NJ, 7470

Register Now
5 October

Regional Training | Registration Required

Capital Heights, MD - GPTP Installation (XL Slabs)

Attendees will learn the tile industry standards with a focus on the new standards and methods for installing Gauged Porcelain Tile and Panels (GPTP). Learn how it is made, where it can be used for and the special tools, setting materials and techniques required to install it. This will teach you Use of ANSI A108.19 to install Gauged Porcelain Tile and Panels. Proper Use of specialty tools and setting materials to install GPTP and Working with a team to install GPTP.

October 5, 7:30AM at Capital Heights

1853 Ritchie Station Court, Capital Heights, MD, 20743

Register Now
19 October

Regional Training | Registration Required

Leesburg, VA - GPTP Installation (XL Slab)

Attendees will learn the tile industry standards with a focus on the new standards and methods for installing Gauged Porcelain Tile and Panels (GPTP). Learn how it is made, where it can be used for and the special tools, setting materials and techniques required to install it. This will teach you Use of ANSI A108.19 to install Gauged Porcelain Tile and Panels. Proper Use of specialty tools and setting materials to install GPTP and Working with a team to install GPTP.

October 19, 7:30AM at Leesburg

950 Edward's Ferry Road, Leesburg, VA, 20176

Register Now