undefined

Mapei 118 Jet Black Ultracolor Plus Max Grout

$25.94 / piece Size: 10lb Color: Jet Black
Calculate my grout quantity
Total Items Needed:
Quantity of pieces
$25.94 / piece
Limit of 9,999
We have adjusted the number of products entered as the maximum quantity threshold is 9,999. If you need to purchase a higher quantity, please contact Customer Care at 877-675-0002
subtotal
Item will be shipped and should arrive in 5-10 days.
You will be notified by email when the item arrives.
Shipping charges may apply.

Check Other Stores

This item can be picked up TOMORROW for FREE

Item will be shipped and should arrive in 7-14 days.

Shipping charges may apply. Items may arrive in multiple shipments.

Delivery details

Calculate Estimated Shipping + Handling Cost
Consider in-store pickup or contact Customer Care at 404-720-9120 for home delivery pricing.
Estimated Shipping + Handling Cost $16.23

Materials You Need from Start to Finish

Specifications

Dimensions
Size 10lb
Product Length (inches) 6
Product Width (inches) 6
Item Weight (lbs) 10
Maximum Coverage Area (in sqft.)

The estimated amount of coverage based on product size and manufacturer’s recommend (or commonly used) install application.

 147sqft.
Details
Project Grouting Materials
Flooring Type Fine Aggregate
Vendor Part Number 6BS011805
Color Jet Black
Flooring Type Tile Stone & Glass
Color/Finish Family BLACK
Mold/Mildew Resistant Yes
Frost Resistance Post Installation

Product's ability to withstand freeze-thaw cycles when directly exposed to the elements after installation is complete.

 Yes
UV Stable Yes
Additive Required Not Required
Shade Family Medium
Installation & Warranty
Warranty

Commercial and/or Residential manufacturer product guarantee to give you peace of mind.

 Lifetime Limited
Placement Location Indoor/ Outdoor
Installation Options

The surface for which the product can be installed upon. The surface should be clean, stable, and meet installation and warranty guidelines prior to installation.

 Floor/Wall
Commercial / Residential Use Residential/ Commercial
Submersible

Indicates the product’s ability to not only be exposed to water, but to have a certain level of protection or resistance in settings completely surrounded in water.

 Yes
Use with Steam Shower Yes
Dry Time

Recommended time to allow the product application to dry.

 3-4 hours
Rapid Setting Yes
Pot Life

Amount of time item can be stored for next use after opening.

 30 minutes - 1 hour
Application Temperature Range

Indicates the maximum and minimum recommended temperatures to use or install product in for best results.

 50-95 deg. F/ 10-35 deg. C
LEED Point Eligible Yes
Show More

Product Details

Ultracolor Plus Max is an ultra-premium, fast-setting, polymer-modified, non-shrinking grout that offers rich and vibrant colors with maximized color depth and color consistency. This fine-aggregate grout can be used for joint widths from 1/16" to 3/4" (1.5 mm to 19 mm). Ultracolor Plus Max includes DropEffect technology for reduced surface absorption, helping to repel water, dirt and grime from penetrating grout joints. It is also specially formulated with MAPEIs High-Hydrated Cement Technology (HCT) to provide advantages over traditional grout, such as eliminating efflorescence and increasing stain resistance. Ultracolor Plus Max is formulated with pre-consumer recycled raw material and meets the ANSI A138.1 specification for Green Squared certification.

Features and Benefits

  • Maximized color depth
  • Maximized color consistency
  • Less water required when mixing and washing
  • Easier workability and cleaning
  • Fine aggregate for use in joint widths 1/16" to 3/4" (1.5 to 19 mm)
  • Fortified with MAPEIs BioBlock technology

Install & Product documents

Customer Questions & Answers