Schluter Dilex-Ahka In Corner 90 Degrees Aluminum Satin

Schluter-DILEX-AHKA is an anodized aluminum cove-shaped profile for transitions between walls to be tiled and previously finished floors. The profile features a single trapezoid-perforated anchoring leg that is secured in the mortar bond coat and a dovetailed channel which can be bonded to floor surfaces using Schluter-KERDI-FIX epoxy resin silicone thin-set mortar etc. A 3/8in. (10 mm) radius cove section forms the visible surface and prevents the accumulation of dirt making cleaning simple. DILEX-AHKA prevents surface water penetration and meets the maintenance and hygienic requirements of commercial kitchens bathrooms and food-processing plants or any tiled environment where a sanitary cove base is desired. DILEX-AHKA integrates with the Schluter-DILEX-AHK and Schluter-RONDEC profiles at 90 degree inside and outside vertical wall corners respectively. Accessories for DILEX-AHKA include 90 degree and 135 degree inside and outside corners and end caps.